Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Kent Homeowners
When a torsion or extension spring snaps, the door becomes dead weight – it won’t lift, and forcing it can bend tracks or burn out the opener. That’s the exact problem we solve. Our technicians have up to 10 years of experience diagnosing and replacing springs on the makes Kent homeowners actually own, and spring work is one of our standalone specialties, not something we farm out. We offer same-day service for spring failures, and every price is quoted and agreed before any work starts. Call (877) 606-8952 and we’ll get a technician headed your way.
What Our Garage Door Spring Repair Service Includes
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on the bar above your door, and it does the heavy lifting every time the door opens. When it breaks, the door usually won’t budge, or it slams down hard. We replace the failed spring and check the balance of the door so the new spring isn’t fighting a misaligned track or worn rollers. We also confirm the spring is wound to the correct tension for your door’s weight before we call the job done.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door and stretch as the door closes. They’re common on older Kent homes, and when one lets go it can whip toward anything nearby, which is why safety cables matter. We replace the spring and inspect the mounting points and cables at the same time. If the pair is worn evenly, we’ll tell you whether replacing both makes sense.
Broken Spring Repair
A broken spring is the most common reason a door won’t open, and it’s also the most dangerous to handle yourself. The stored tension in a wound spring can release in an instant, so this isn’t a job for a ladder and a pair of gloves. We identify which spring failed, confirm the door is safe to work on, and replace the broken component with a matched spring.
Spring Adjustment
Sometimes the spring isn’t broken, just out of tune, and the door feels heavy, jerky, or won’t stay open. Adjustment means resetting the tension so the door balances correctly through its whole travel. We check the door’s weight and the spring’s wind count so the fix is precise, not guesswork. Left alone, an unbalanced door wears out the opener and the springs faster.
Safety Cable Installation
Safety cables run through the center of extension springs so a broken spring can’t fly loose. If your older door has springs without cables, that’s a real gap in safety. We install cables sized for your spring and door setup and check that they’re anchored correctly. It’s a small addition that matters a lot when a spring finally fails.
Spring Inspection
A spring inspection catches wear before it turns into a snapped spring and a door stuck halfway. We look for gaps in torsion springs, stretched extension springs, and rust or fraying at the ends, since those are the usual failure points. If the springs still have life left, we’ll say so and leave them alone. If they’re close to failing, you’ll know before it happens.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Springs are springs in principle, but the door around them isn’t. A Wayne Dalton door and an Amarr door carry their weight differently, and that changes how the spring should be sized and wound. We service Wayne Dalton equipment and know where those doors tend to wear at the spring and cable points. We also work on Amarr doors regularly, including the heavier insulated models where getting the spring tension right matters even more.
Craftsman and Raynor systems come through Kent homes often enough that our technicians recognize the telltale signs of spring wear on those doors without a long diagnostic. Craftsman openers paired with a tired spring will strain and eventually give out, so we check the opener alongside the spring. Raynor doors have their own spring mounting quirks, and we adjust our approach to match. Whether you have a Craftsman, a Raynor, or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A snapping torsion spring sounds like a gunshot and usually happens when no one’s watching. If you heard it and the door won’t open, stop using the door and call us.
- The door feels extremely heavy. If lifting the door by hand takes real effort, the spring has lost its tension or broken. Don’t force it, because the opener and tracks take the strain.
- A visible gap in the spring. A torsion spring with a clear gap in the coil has broken. Extension springs that look stretched out or have lost their curl are close behind.
- The door opens a few inches and stops. This often means the spring isn’t assisting the door, so the opener gives up. It can also point to an opener problem, which is why a proper diagnosis matters.
- The door slams down instead of settling. A door that drops hard or won’t stay open is running without spring support. That’s a safety issue for anyone under it, including kids and pets.
Our Garage Door Spring Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. We ask what the door is doing so we can bring the right springs and tools. Same-day slots are available for spring failures, and we’ll confirm a window that works for you.
- 2
On-site safety check. Before anything else, we secure the door and confirm the springs are fully de-tensioned. That step protects both the technician and your door from a sudden release.
- 3
Spring and door inspection. We measure the spring, check the door’s balance, and look at the cables, rollers, and tracks. This tells us whether it’s one spring, a pair, or something else adding strain.
- 4
Written estimate before work. You get a clear price for what’s needed, and nothing starts until you agree to it. If we find something extra, we explain it before touching anything.
- 5
Replacement, testing, and cleanup. We install the new spring, wind it to the correct tension, and run the door through several full cycles. Then we test the safety reverse and leave the garage as we found it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Kent?
Garage door spring repair in Kent typically costs $180 – $340 for one spring. That range reflects the spring itself, the labor to wind and tension it safely, and the balance check that goes with it. A matched pair is usually replaced together, so a pair costs about twice that range. Beyond springs, related work runs on its own scale:
- Spring repair (one spring): $180 – $340
- Cable repair: $130 – $250
- Track realignment: $120 – $240
- Roller replacement: $110 – $220
- Garage door repair (general): $150 – $600
What affects the price is the spring type (torsion versus extension), whether one spring or a pair failed, and whether cables or tracks need attention at the same time. You avoid overpaying by getting a written estimate before work begins and asking what’s included. Our estimates are free, and the written estimate sets the final price – it doesn’t creep up once the job starts. Call (877) 606-8952 for an exact quote.
Garage Door Spring Repair Near Kent – Our Service Area
We handle spring repair across Kent and the surrounding communities, including Covington, Fairwood, Auburn, Des Moines, SeaTac, and Lakeland North. We also reach out toward Maple Valley and Lake Morton-Berrydale, and customers there can find our garage door spring repair service page for that area. If you’re not sure whether your address is in range, call and we’ll tell you straight. For a full look at everything we handle in Kent, start with our garage door spring repair overview or the main Kent Garage Door Repair Pros page.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Kent
Garage door spring repair means replacing or adjusting the springs that counterbalance your door’s weight. Without working springs, the door is too heavy to lift by hand or with the opener. It covers torsion springs, extension springs, and the safety cables that go with them. We handle all of it, and every job starts with a written estimate.
Most single-spring replacements take about an hour to ninety minutes on site. A matched pair, or a job that includes cables or track work, runs longer. We give you a realistic window when you book, and we test the door through several cycles before we leave. If something unexpected turns up, we tell you before the time or price changes.
Spring repair in Kent typically runs $180 – $340 for one spring, with a matched pair costing about twice that range. The final price depends on the spring type, whether cables or tracks need work, and the door’s condition. You’ll get a free written estimate before any work begins. Call (877) 606-8952 for an exact quote.
Yes, we service both Wayne Dalton and Amarr doors, along with Craftsman and Raynor systems. Our technicians match the spring and tension to the door’s make and weight rather than guessing. That brand-specific approach is why we cover the makes Kent homes actually have. If your door is a different brand, call and we’ll confirm we can help.
Yes, we offer emergency garage door service for sprung doors that leave your home open or your car trapped. A broken spring can make the door unusable, and we treat that as urgent. Call (877) 606-8952 and we’ll book the soonest slot we have. For a stuck door in a hurry, remember to keep people clear of the door until a technician arrives.
Our spring repair work is backed by a satisfaction guarantee. If something isn’t right after the job, we come back and make it right. The exact coverage is explained in your written estimate so there are no surprises. Ask us about it when you book, and we’ll walk you through what’s covered.
Clear the area under and around the door and move cars out of the garage if you can. Don’t try to lift or force the door yourself – the spring is under high tension and can injure you. Have your door’s make and any opener model handy if you know them. Then leave the rest to us.
Schedule Your Garage Door Spring Repair Service in Kent Today
A broken spring won’t fix itself, and every day you force the door the damage spreads to the opener and tracks. Call (877) 606-8952 for a free, no-obligation estimate on spring repair in Kent. Same-day and emergency service is available, and the local pro is licensed and insured as their state requires. One call covers springs, openers, repairs, and installation. Call (877) 606-8952 today. For nearby service, our garage door spring repair page covers Snoqualmie.
Written by the team at Kent Garage Door Repair Pros.