Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Kent Homeowners
A new garage door is one of the few upgrades that changes how your whole house looks from the street, and it’s the first thing most Kent homeowners notice when the old one starts to sag, sticks halfway up, or won’t close flush anymore. We handle the whole job: measuring, ordering the right door for your opening, removing the old one, and getting the new one balanced, sealed, and running smoothly before we leave. Our technicians have up to 10 years of experience, and because we service your brand specifically, you’re not getting a generic installer guessing at your setup. Installation work is measured and scheduled rather than rushed, so you’ll get a free on-site measure, a written price, and a clear date. Call (877) 606-8952 to get started.
What Our Garage Door Installation Service Includes
Every job starts with measuring your opening and talking through how you actually use the door. A one-car door that takes daily wear needs a different door and hardware package than a wide, insulated double door. Here’s what each part of the service covers.
New Door Installation
New door installation means replacing the entire garage door and its spring and hardware system, not just a panel or two. You need it when the door is beyond patching: bent tracks, a twisted or rusted frame, panels that can’t be matched, or a door that keeps failing no matter how many small repairs you throw at it. We remove the old door, check that the opening and the overhead framing are square, and install the new door so the springs, cables, and opener work together from day one.

Single Car Door
A single car door is the standard 8-to-9-foot wide opening most Kent garages have. It’s the most common installation we do, and it’s a good fit for a home where the garage holds one vehicle and a bit of storage. We size the springs to the actual door weight rather than ordering a generic set, which is what keeps a single door from feeling heavy or slamming down when it closes.

Double Car Door
Double car doors run 16 feet wide in most homes, and the extra span is where weight and balance matter most. You need one when the opening is wide or when the old double door has started to sag in the middle, which usually means the framing or the old hardware has been working too hard. We check the headroom and the torsion setup so a wide door runs evenly across its whole width instead of pulling to one side.

Custom Garage Door
A custom door is built to fit an opening that isn’t standard, or to match a specific look: a particular window layout, color, or panel style. You need one when your garage opening has unusual dimensions, a low ceiling, or a home style that stock doors don’t match well. We take careful measurements, walk you through the options that actually suit the space, and spec a custom door that will work with your existing or new opener.
Steel Doors
Steel is the most common door material in the Pacific Northwest because it holds up well in damp weather and is available in insulated versions. You need steel if you want a low-maintenance door, better temperature control in a garage that shares a wall with the house, or a clean, modern look. We install steel doors in a range of styles and make sure the bottom seal and weatherstripping are set right so our wet season doesn’t creep in under the door.
Wood Doors
Wood doors bring warmth and character that steel just can’t match, especially on older Kent homes and Craftsman-style houses. You need one when the house calls for a natural material or you want a door that can be stained and refinished over time. Wood is heavier and needs more care in a wet climate, so we talk through the finish and the maintenance it will want before you commit, and we make sure the springs are rated for the extra weight.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We service Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and our technicians diagnose the actual make and model rather than guessing. That matters on installation because every manufacturer has its own panel dimensions, hardware, and springing. An Amarr door from one product line weighs and loads differently than a similar-looking Wayne Dalton, and knowing that up front is what keeps the door balanced and quiet on day one.
Craftsman and Raynor systems have their own quirks too. Craftsman hardware shows up on a lot of homes around Kent, and Raynor doors often come with details that reward a close look before you swap anything out. Because we work across all of these lines, we’re not trying to steer you toward one brand. Whether you have Amarr, Wayne Dalton, Craftsman, or any other make, we can help you get the right door and install it correctly.
Signs You Need Garage Door Installation Right Now
- The door is bent or structurally failing. Panels that are creased, a frame that’s twisted, or a door that visibly sags in the middle usually means the whole door has seen its last repair. When the structure is compromised, a new door is safer than trying to straighten something that’s already weak.
- The door won’t close flush with the ground. A gap along the bottom lets water, drafts, and pests under the door, and in our wet winters that can mean moisture in the garage. If a door won’t seal no matter how the tracks and hinges are adjusted, replacement is often the right call.
- Track and panel damage keeps coming back. Repeated problems with tracks, rollers, and panels often point to a door that’s out of square or simply done. Repeated small repairs on a failing door are money spent that a new installation would have covered once.
- The door is too heavy to lift by hand. A properly balanced door should move with light effort. If it feels like dead weight, the springs are wrong for the door or the door itself has warped, and that’s a sign to look at replacement.
- You’re updating the house or listing it. A tired door drags down curb appeal and resale value. Installation isn’t urgent in that case, but it’s the kind of update that pays off every morning you pull out of the driveway.
Our Garage Door Installation Process – Step by Step
Installation is a measured, scheduled job, not a same-day repair, so we take the time to get the order right. Here’s how a typical project runs.
- 1
Free on-site measure. We measure the opening, check headroom and side clearance, and look at how the existing door is hung. This is where we catch the details that decide which doors will actually fit and which opener will work with them.
- 2
Written estimate and door selection. You get a written price with the door, hardware, and labor separated out, so you can see what you’re paying for. We walk through style, material, insulation, and window options, and you pick what fits your home and your budget.
- 3
Ordering and scheduling. Once the door is chosen, we order it and lock in an installation date. Custom doors and some materials take longer to arrive, so we tell you the timeline up front.
- 4
Removal and installation. On install day we take out the old door and hardware, prepare the opening, and install the new door, tracks, and springs. Springs are set to the actual door weight, and the opener is mounted and aligned to match.
- 5
Balance check and walkthrough. We test the door by hand and with the opener to confirm it runs smoothly, closes flush, and reverses properly. Then we walk you through how it works and how to keep the door, seal, and hardware in good shape.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Kent?
A typical new garage door installation in Kent runs $700 – $2,200 depending on door size, material, insulation, and hardware. The most common scenario, a standard single or double car door in steel, usually lands in the middle of that range. A custom door or a premium insulated door with windows can push toward the top.
| Scenario in Kent | Typical Estimated Cost |
|---|---|
| Single car steel door, standard hardware | $700 – $1,200 |
| Double car steel door, standard hardware | $1,000 – $1,800 |
| Insulated or premium steel door | $1,300 – $2,000 |
| Custom or wood door, plus hardware | $1,500 – $2,200 |
| Opener installation (if needed alongside the door) | $250 – $550 |
What affects the price most: the door size, the material, insulation, window options, and whether your existing tracks and opener can be reused. You avoid overpaying by getting the written estimate before anything is ordered, and by skipping features you don’t need. Our free estimate includes the measure, a clear written price, and a breakdown of the door, hardware, and labor. Nothing starts until you’ve agreed to the price.
Garage Door Installation Near Kent – Our Service Area
We book installations across Kent and the surrounding towns, including Covington, Auburn, Fairwood, Des Moines, SeaTac, Maple Valley, and Snoqualmie. We also reach Port Orchard, Bainbridge Island, and Lakeland North. Installation is scheduled rather than same-day, and we confirm your date after the free measure. If you’re outside Kent, call and we’ll talk through timing. You can also read about our garage door installation work in nearby Maple Valley, or visit Kent Garage Door Repair Pros for the full picture.
Serving Kent, WA – Our Local Coverage Area
We serve Kent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Kent
Garage door installation is the full replacement of your existing door with a new one, including new tracks, springs, and hardware sized to the door. It’s different from a repair, which fixes a specific part on a door that’s still structurally sound. Installation starts with measuring your opening and ends with a balanced, sealed door that works with your opener.
Most installations are done in a single visit once the door arrives, usually a few hours for a standard single or double door. Custom doors and some materials take longer to manufacture and ship, so the wait is mostly in ordering rather than installing. We give you a clear timeline with your written estimate so you know when to expect the door.
Typical installation in Kent runs $700 – $2,200, depending on door size, material, and options. Steel doors tend to land in the lower and middle part of the range, while custom and wood doors sit higher. The written estimate sets the final price, and it won’t change once you’ve agreed to it. Call (877) 606-8952 for an exact quote.
Yes, we service Craftsman and Amarr as well as Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie, and Clopay equipment. Our technicians know the differences in hardware and springing between these makes, which helps us match a new door to the rest of your system. If you’re not sure what you have, we can identify it during the free measure.
We offer dedicated emergency garage door service alongside standard installation. A door stuck open or hanging off its tracks is a security and access problem, so it’s worth a call rather than a wait. Installation itself is scheduled, but urgent repairs and emergency response are available. Call (877) 606-8952 and we’ll work out the quickest path.
New doors and openers carry their manufacturer’s warranty, and we walk you through exactly what’s covered when we install. Our labor is backed by our satisfaction guarantee on the work we perform. Ask us about the warranty on your specific door during the estimate so there are no surprises later.
Clear the garage floor and the driveway so we have safe room to work, and move anything breakable away from the door area. Make sure we can reach the opening and that the space under any low ceiling is clear. If you have an opener, note how it’s currently mounted, and we’ll take it from there.
Schedule Your Garage Door Installation Service in Kent Today
A new garage door is a measured, scheduled job, and it starts with a free on-site measure and a written price. Our technicians have up to 10 years of experience, and we work across all eight major brands so you get a door that fits your home and your opener. Nothing starts until you’ve agreed to the price. Call (877) 606-8952 for a free estimate and no-obligation quote. If you’re comparing doors across the area, our garage door installation in Snoqualmie is worth a look too.
Written by the team at Kent Garage Door Repair Pros.