Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in SeaTac?
Garage door work in SeaTac typically runs $150 – $600, with most repairs landing near the middle of that range and full door replacements climbing to $700 – $2,200. A snapped spring usually costs $180 – $340 for one spring, while a basic roller or track fix often comes in under $250. The written estimate we give you after looking at the door sets the final price, and estimates are free.
We’re Kent Garage Door Repair Pros, and the pricing on this page reflects what SeaTac homeowners actually face in 2026: older doors on homes built through the last decades of South King County growth, openers that have outlived their remotes, and the occasional panic call when a door won’t close at 7am. We connect you with a vetted local professional who diagnoses the actual make and model rather than guessing. Our technicians have up to 10 years of experience, and the local pro is licensed and insured as their state requires.
Key Takeaways
- Typical garage door repair in SeaTac: $150 – $600.
- A single torsion or extension spring: $180 – $340. A matched pair is usually replaced together, so expect roughly double.
- New door installation: $700 – $2,200, driven mostly by door size, material and insulation.
- Opener repair runs $120 – $320; full opener installation is $250 – $550.
- Free estimates, and we can work with your insurer on storm or impact damage.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs cost in SeaTac this year. These are typical estimated ranges, not quotes. The exact figure depends on your door, your opener and what’s actually broken.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a job toward the top of a range? Usually it’s a spring pair instead of a single spring, a door that’s been binding for months and needs tracks, rollers and cables at once, or an opener board that has to be replaced rather than a sensor that needs realigning. A door that’s simply out of balance and noisy sits at the low end. New installation is the widest range on the list because a single-car door in steel costs far less than a double-wide insulated door with windows and a belt-drive opener added on.
Springs deserve their own note. The $180 – $340 figure covers one spring. On most doors the two springs are matched and wear out together, so a pair costs about twice that range. We’ll tell you which you need after we look.
What Affects Garage Door Pricing in SeaTac
- Door size and style. A standard single-car door is the cheapest to repair and replace. Doubles, carriage-house styles and anything with a row of windows add material and labor.
- Spring type and count. Torsion springs mounted on a shaft cost more to replace than extension springs, and a matched pair costs about twice a single spring. Torsion work is also the most dangerous part of the trade, which is why we treat it as its own specialty rather than a side job.
- Brand and model. An opener from LiftMaster, Chamberlain, Genie or Craftsman behaves differently when it fails, and a technician who knows the line diagnoses it faster than one who doesn’t. We also work on doors from Clopay, Amarr, Wayne Dalton and Raynor. Knowing the make shortens the diagnostic and keeps you from paying for parts you don’t need.
- Weather and moisture. SeaTac’s wet winters work on steel panels, hinges and roller bearings. A door that sat through a damp season often needs lubrication and hardware attention alongside the repair you called about, and that adds to the bill.
- Age of the door and opener. A door past its second decade often needs several small parts at once. An opener more than a decade old may be past the point where a $120 repair makes sense against a $250 – $550 replacement.
- Emergency timing. A door that won’t close leaves the house open, so emergency calls carry a premium over a scheduled visit. We treat emergency garage door service as a confirmed offering because a stuck door affects access and security the same day, not next week.
How to Save on Garage Door Work in SeaTac
The biggest savings come from catching problems early. A door that starts squealing or feels heavy usually has a lubrication or balance issue that runs cheap. Left alone, that same door wears out rollers, cables and eventually the opener, and a $110 roller job turns into a $600 repair.
- Get the estimate in writing before work starts. Free estimates mean you can compare a diagnosis without paying for the visit. Call (877) 606-8952 and we’ll book one.
- Fix the opener before it dies. If your opener is straining, reversing randomly or the remote works only up close, an opener repair at $120 – $320 beats a full installation at $250 – $550.
- Replace the pair, not the survivor. When one spring snaps, the matching spring is on the same clock. Replacing both at once costs about twice a single spring, but doing them separately costs more overall and means the door is out of service twice.
- Ask about the panel, not the whole door. A dented or rusted section can often be swapped for $250 – $500 instead of replacing the door. If the frame, springs and tracks are sound, panel replacement is the cheaper path.
- Keep the tracks clear and the hardware oiled. A few minutes a couple of times a year keeps rollers and hinges from seizing in the damp months. It’s the least expensive maintenance there is.
We can also work with your insurer if damage came from a storm or an impact, so ask about that when you call.
Spring Repair vs. Full Replacement: Which Costs Less?
Repair almost always costs less than replacement when the door itself is structurally sound. A spring pair at roughly double the $180 – $340 single-spring range is still far below a new door at $700 – $2,200, and it restores the door you already have. Replacement makes sense when the door is bent, the panels are rusted through, or the opener, springs and tracks are all failing at once.
One safety note we won’t skip: torsion springs and the cables under tension can cause serious injury if handled without the right tools and training. We don’t recommend adjusting or removing them yourself. This is the part of the job that separates a garage door specialist from a general handyman, and it’s why we keep spring repair as a dedicated service. A trained professional handles it safely.
Can You Fix It the Same Day?
Same-day service is often possible, and we run emergency response for doors that are stuck open, stuck closed or hanging off a track. Fast dispatch runs from 7am to 7pm. If your door failed on a Saturday, we’re closed that day, but call and we’ll book you for Sunday.
When you call, tell us the brand if you know it. LiftMaster, Chamberlain, Genie and Craftsman openers each have their own failure patterns, and Clopay, Amarr, Wayne Dalton and Raynor doors differ in how panels and hardware come apart. A technician who knows the model arrives with the right approach instead of a generic guess.
What Should You Check Before Calling for a Quote?
A few details speed up the estimate and can keep the price down. Have these ready when the technician arrives:
- The door brand and, if you can find it, the model on the opener housing.
- Whether the door is single or double, steel, wood or aluminum.
- What the door does when you press the button: nothing, moves partway, reverses, or runs but the remotes don’t work.
- Any noise, grinding or visible sag you’ve noticed.
- Whether the door is currently stuck open or closed, since that changes the urgency.
For a broader look at scheduling, repair options and what we cover, see our main service page for garage door work in the area.
FAQs – Garage Door Cost in SeaTac
How much does garage door repair cost in SeaTac?
Garage door repair in SeaTac typically runs $150 – $600 in 2026, depending on what failed. Roller and track work sits at the low end near $110 – $240, while a spring pair and hardware rebuild pushes toward $600. The written estimate sets the final price, and estimates are free. Call (877) 606-8952 for an exact quote.
How much does spring repair cost in SeaTac?
Spring repair costs $180 – $340 for one spring. Because the two springs on most doors wear out together, a matched pair is usually replaced at once, so budget roughly double that range. Spring work is dangerous without the right tools, so it’s a job for a trained professional. Call (877) 606-8952 to get your spring priced.
Is it cheaper to repair or replace my garage door?
Repair is cheaper in most cases. A repair at $150 – $600 beats a new door at $700 – $2,200, and it’s the right call when the panels, frame and tracks are sound. Replacement wins when the door is bent, rusted through, or when springs, opener and tracks are all failing together. Call (877) 606-8952 and we’ll tell you honestly which path fits your door.
How much does a new garage door cost in SeaTac?
New garage door installation in SeaTac typically runs $700 – $2,200 in 2026. The spread comes down to size and material: a single steel door sits near the low end, while a double insulated door with windows and a new opener pushes toward the top. We can quote a new door and an opener installation together at $250 – $550 for the opener. Call (877) 606-8952 for a free estimate.
How much does opener repair cost in SeaTac?
Opener repair typically costs $120 – $320. Full opener installation runs $250 – $550 if the unit is past saving. We service LiftMaster, Chamberlain, Genie and Craftsman openers, so we diagnose the specific model rather than swapping parts blindly. Call (877) 606-8952 and we’ll get an exact figure.
Get a Free Estimate for Your SeaTac Garage Door
A door that won’t close, a spring that snapped, or an opener that finally quit: whatever the cause, we can look at it, tell you what it needs, and give you a written price before work starts. We cover repairs, opener repair, spring repair and full installation across the leading brands, and we’re here when a door fails at a bad moment. We connect you with a local professional who is licensed and insured as their state requires, and we stand behind the work with a satisfaction guarantee.
Call (877) 606-8952 for a free estimate, or to book same-day or emergency service during our 7am to 7pm dispatch window.
Pricing reflects the SeaTac market as of 2026. Kent Garage Door Repair Pros offers free estimates – call (877) 606-8952.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Gabriela Vargas"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Heather Hayes"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Priya Patel